DH28PBY CHIPPER 850 W HIKOKI

850 W rotary hammer code DH28PBY HIKOKI
This rotary hammer is powerful, compact and lightweight. It is reversible and equipped with an SDS-PLUS connection. The DH28PBY rotary hammer has a safety clutch and an electronic speed adjustment switch. The manual selector that allows you to choose the working mode has been positioned in an easily accessible point. The two working modes are: rotation and percussion and rotation only. Thanks to the combined action, the DH28PBY rotary hammer is useful for opening anchor holes, for drilling reinforced concrete and brick.
Thanks to the anti-vibration UVP technology, the hammer hammer is very comfortable even when used for long-term work. The design of this tool is ergonomic: power and practicality are not lacking for those who choose Hitachi.
The hammer hammer is made with a new pneumatic technology to optimize the impact energy. The internal pressure of the pneumatic chamber is also regulated automatically for the same purpose. These new technologies also have the advantage of limiting tool wear. The blank shot prevention system is also very effective.
The bushing was replaced by a bearing. This second shaft modification offers excellent resistance to high temperatures.
Data sheet
SDS-plus connection
Ø hole in concrete 28 mm
Ø hole in steel 13 mm
Ø hole in wood 32 mm
Ø hole with crown tip 50 mm
Power consumption 850 W
Energy per single hit 3 J (EPTA)
No-load speed 0 ~ 1,100rpm
Percussion at full load 0 ~ 4,300 strokes / min
Length 367 mm
Width 75 mm
Height 198 mm
Weight 2.9 kg
Maximum vibrations (EN 60745) 11.5 m / s2 (triaxial)
Carbon brushes 999041 standard
Carbon brushes 999072 self-locking