DH24PG CHIPPER 730 W HIKOKI

730 W rotary hammer code DH24PG HIKOKI
Demolition hammer with 2 working modes with combined action of rotation and percussion. It is used for opening anchor holes, for drilling reinforced concrete and brick. The two working modes are rotation with percussion and rotation only
This 730W model is compact and lightweight and is equipped with a safety clutch and electronic speed adjustment switch.
Thanks to the new pneumatic technology, the impact energy is optimized. The parts subject to wear remain reliable over time. This hammer drill is also equipped with a new automatic pressure regulation system of the pneumatic chamber. Thanks to all these innovative systems, the perforation is optimized to perfection.
In the DH24PG the bushing where the second shaft works has been replaced by a bearing. This solution has the purpose of increasing the resistance to high working temperatures.
To protect the worker, the hammer hammer has a prevention system against empty hits. The manual selector of the two working modes is ergonomically positioned. The whole design of the machine is extremely functional.
Data sheet
SDS-plus connection
Ø hole in concrete 24 mm
Ø hole in steel 13 mm
Ø hole in the wood 32 mm
Ø hole with crown tip 50 mm
Power consumption 730 W
Single hit energy 2.7 J (EPTA)
No-load speed 0 ~ 1,050rpm
Percussion at full load 0 ~ 3,950 strokes / min
Length 367 mm
Width 75 mm
Height 198 mm
Weight 2.7 kg
Carbon brushes 999041 standard
Carbon brushes 999072 self-locking