TECHNOMIG 215 DUAL SYNERGIC 230V cod. 816053 Microprocessor controlled MIG-MAG / FLUX / BRAZING / MMA / TIG DC-Lift multiprocess inverter welding machine. The flexibility of use and the different welded materials (steel, stainless steel, aluminum) or brazed (galvanized sheets) confirm Technomig Dual Synergic as an excellent solution in a wide variety of application fields, from maintenance, to installation, to bodywork interventions. The rapid SYNERGIC adjustment of the welding parameters, thanks to the ONE TOUCH LCD SYNERGY technology, makes the product very easy to use. The intelligent and automatic control of the arc, instant by instant, will maintain high welding performance in all working conditions, with different materials and / or gases. It is also possible to manually intervene on the arc length: this adjustment will allow you to change the shape of the weld bead according to the welder's style. The ONE TOUCH LCD graphic display allows a better reading of all welding parameters. The ATC technology, Made in telwin, allows you to easily obtain excellent welds on thin surfaces thanks to advanced arc control. Low weight and maximum compactness also ensure easy portability in all areas of intervention, both indoors and outdoors. Features: - Polarity change for NO GAS / Flux, MIG-MAG / BRAZING welding; - 27 synergic curves prepared; - LCD display of voltage, current, welding speed; - Adjustments: wire ascent ramp, electronic reactance, final wire burn time (burn back), post gas; - Selection of 2/4 times, spot operation; - VRD device; - Thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (+/- 15%) protections. Complete with MIG-MAG torch, cable and ground clamp. MMA TIG DC LIFT COIL 15 kg MIG-MAG FLUX CE MARKING 1 PH 230V EAC CERTIFICATION MICROPROCESSOR TÜV CERTIFICATION
CODE 816053 D. USABLE ELECTRODES IN DC 1,6 - 3,2 mm SINGLE-PHASE MAINS VOLTAGE 230 V D. STEEL WELDING WIRE 0,6 - 1 mm NETWORK FREQUENCY 50/60 Hz D. STAINLESS STEEL WELDING WIRE 0,8 - 1 mm FIELD REG.NE CURRENT 20 - 220 A D. ALUMINUM WELDING WIRE 0,8 - 1 mm MAX DC CURRENT (EN 60974-1) 180 @ 20% A D. ANIMATED WELDING WIRE 0,8 - 1,2 mm CURRENT IN DC 100 A D. BRAZING WIRE 0,8 - 1 mm MAX NO LOAD VOLTAGE 78 V DEGREE OF PROTECTION IP23 MAX ABSORBED CURRENT 32 A DIMENSIONS 62 x 26 x 49 cm ABSORBED CURRENT AT 60% - MAX 15 A WEIGHT 22 kg MAX ABSORBED POWER 5 kW EAN CODE 800489791763 4 ABSORBED POWER AT 60% 2.2 kW PIECES / PALLET 8 pcs / pallet PERFORMANCE 84% PIECES / PALLET - B4 pz / pallet B POWER FACTOR (cosphi) 0.7
Lo sviluppo tecnologico di Telwin a servizio della saldatura professionale e del settore automotive
