ELECTRICIANS: S3 SHOES ARE NOT ENOUGH TO PROTECT YOU
ELECTRICIANS: S3 SHOES ARE NOT ENOUGH TO PROTECT YOU
S3 safety shoes don't protect against electrical hazards. If you work near electrical currents, you need CSA and ASTM-certified insulating footwear: secondary PPE that truly increases your safety. Find out why electricians shouldn't rely solely on S3 shoes.
The complete guide to electrical protection: regulations, risks, differences, and truly safe footwear.
If you work near electrical power, a standard S3 or SB safety shoe isn't enough. These shoes protect against impacts, punctures, and slips, but they're not designed to insulate you from voltage. For electricians, maintenance workers, and installers, the difference between an S3 and truly insulating footwear can be enormous. The Electrical line was created precisely for this purpose: to offer protection that S3 shoes—designed for mechanical protection —cannot provide.
Do you want real protection from electrical hazards?
Discover the Electrical line: ELECTRO, WATT and VOLT.
“Electrifying” Safety: the advanced protection of Exena's Electrical line
In the modern industrial landscape, the electrification of processes and the spread of sustainable mobility have introduced new risk scenarios. Electricity is the engine of progress, but it remains one of the most unpredictable and dangerous forms of energy. For this reason, Dinamitek offers a solution designed for those who work closely with electricity: the Exena Electrical line.
An invisible armor against electrical risks
Electrical footwear isn't just safety footwear, but the result of extensive design and material re-engineering. They're designed as true "lightning-proof" armor, transforming workwear into an effective barrier against electrical shock.
These shoes are fully insulating and represent essential equipment for those who work in environments with a high risk of electrocution and shock.
International standards for total protection
- Certifications: CSA Z195-14 (Canada) and ASTM F2413-11 (USA)
- Insulation capacity: insulation up to 1000 V
- Shock test: withstand up to 18,000 V in dry conditions, leakage ≤ 1.0 mA
Note: These shoes are secondary PPE and must be used in conjunction with the primary PPE intended for working under tension.
DISCOVER THE ENTIRE RANGE OF DINAMITEK PPE
The "superheroes" of the Electrical line: which one to choose?
VOLT – Strength in lightness
High-top boot in water-repellent full-grain leather, composite toecap and Mondopoint 12 fit. Ideal for stability, comfort and protection in the most demanding operations.
WATT – Ergonomics and resistance
Low-top version of the Electrical line. High-density materials and an ultra-resistant rubber sole. Perfect for those who want freedom of movement without sacrificing safety.
ELECTRO – Light as lightning
Only 490 grams. High-frequency microfiber upper. Ideal for dynamic work, maintenance, and assembly.
Ready to secure your talent?
Discover the entire Exena Electrical range.
Why S3 and SB aren't enough for those who work near electricity
S3 and SB footwear protects against mechanical risks: impacts, punctures, slips, and abrasions. They're perfect for construction sites and workshops, but they're not designed to handle electrical current.
For those who work near voltage, they are not sufficient to protect against an electric shock.
What do the S3 and SB regulations actually provide?
SB – Basic Requirements
- 200 J toe cap
- Minimum requirements
- No protection from water or electrical hazards
S3 – Advanced Requirements
- All SB requirements
- Anti-perforation plate
- Non-slip sole
- Water Resistance (WRU)
- Antistatic sole (A)
Neither category provides electrical insulation. Antistatic properties are designed to discharge current to ground: the opposite of what an electrician needs.
CSA Z195-14 and ASTM F2413-11: Everything You Need to Know
International standards define the requirements for footwear intended to protect against electrical risks.
Electrical requirements
- Shock test: up to 18,000 V
- Maximum leakage: ≤ 1.0 mA
- Bottom insulation: up to 1000 V
Practical Checklist: When to Choose Electrical Footwear
- Work near electrical panels or live lines
- You work in dry environments
- You need extra protection
- Manage maintenance or installations
- Want to reduce the risk of accidental shock?
Basic warnings for use
- Use only in dry environments
- Do not use in the presence of gas or explosive substances
- Always wear together with primary PPE
- Replace if sole is damaged
- Do not use if saturated with water, oil or conductive liquids
EXENA: protection that really makes a difference
Electrical footwear is designed for those who work in contact with electrical risks every day. It offers certified insulation and protection that standard S3 footwear cannot guarantee.
For maintenance workers, installers and electricians, choosing Electrical footwear means working with greater safety, professionalism and awareness.
Truly protect your safety: choose the Electrical line
ELECTRICAL, WATTS, and VOLTS are designed for those who work close to electricity. Don't settle for an S3: upgrade to certified protection.