JIB CRANE WITH CHANNEL IN AS CARLO SAPORITI TRUNK
JIB CRANE FIXED TO A BRACKET WITH AN ARM IN THE CHANNEL
The jib crane is a structure where a simple beam is hinged to a pillar. The bracket-fixed crane exploits the presence of a reinforced concrete pillar, in order to avoid the installation of a special steel column. FOR ANCHORING, USE THE COUNTER BRACKETS FOR PILLARS, you can find them under accessories.
The bracket crane is made up of an arm in normal steel profile and a bracket attachment where the crane and its rotation are fixed to the supporting structure. With special 8G screws and with specific brackets for the single situation, the bracket is anchored to the pillar. By contacting the info@dinamitek.com customer service, the most suitable solution will be established.
The bracket solution makes rotation easier, the channel arm facilitates the translation of the trolley along the runway (beam) which runs inside the press-bent "channel profile, allowing any load to be moved in a very fluid and precise way. The version in trunking always provides for the execution with tie rod.
The solution JIB CRANE FIXED TO THE BRACKET WITH ARM IN THE TRUNK, therefore, the translation of the trolley. The trough crane is supplied with a push hoist trolley. The hoist can be purchased separately, the range of electric hoists type PT PHOLGOR is available
By respecting the limits of use and the instructions for use, you equip your establishment with safe and easy-to-use equipment. SAPORITI cranes are designed and manufactured in compliance with the Community Machinery Directive No. 2006/42/EC (in Italy Legislative Decree No. 17/2010) therefore equipped with CE marking, CE declaration of conformity or Manufacturer's Declaration, certificate of testing/fitness for use
In the attached sheet you will find the diagram of the counter-brackets for pillars for column-mounted cranes.
