COLUMN JIB CRANE IN 4 m HIGH CHANNEL AS CARLO SAPORITI
JIB CRANE FIXED TO A COLUMN WITH ARM IN CHANNEL
Solution that stands out for its simplicity and savings. The translation unit, the carriage, slides inside the "channel" press-bent profile. This way of moving is very fluid, it is certainly the most appreciated feature of the channel version: remarkable swing sensitivity and high smoothness of the hoist trolley. The trough column crane must be supported by a tie rod.
The basic principle of the jib crane remains: a beam hinged to a rotating column. The column is anchored to the pavement using the FOUNDATION BASE AND RODS sold separately. This pillar crane consists of a profile steel column and a normal profile steel boom. Pins allow the connection between the arm and the column. The pins rotate on bearings. Specific to the jib crane fixed to the column with the arm in the SAPORITI duct is the calibratable braking device, which allows you to adjust the thrust. You can adjust the thrust rotation of the arm, which covers an area of 270 degrees along the entire length of the arm. same. The translation unit to which the lifting unit is connected runs on the beam. There are therefore 3 movements of the crane: lifting, translation and rotation.
The trough crane is supplied with a push hoist trolley. The hoist can be purchased separately, the range of electric hoists type PT PHOLGOR is available
Comply with the limits of use and the instructions for use in the instruction manual. The SAPORITI crane is certified professional equipment, equipped with CE marking, CE declaration of conformity or Manufacturer's Declaration, Test Certificate/Suitability for use. is produced in compliance with the Community Machinery Directive No. 2006/42/EC (in Italy Legislative Decree No. 17/2010)
For the base of the column, a thick plate is anchored to the foundation plate through fixing holes and special foundation cages with threaded rods suitable for each type of column.
In the attached sheet you will find the diagram of the foundation base and bolts for column cranes. For the choice of the most suitable solution, you can get help from our technician by contacting customer service at info@dinamitek.com
The tasty column crane is delivered after having been painted with a layer of anti-rust paint and a coat of zinc chromate for finishing.
