ADAPTER PATENTED ADAPTER FOR SCHUKO PLUG TO EEC SOCKET
With this adapter patented rosi you can wire in a fixed way, and in the disappearance of a Schuko plug
Technically: adaptor 16A 2P+T-IP44 - WITH the EARTH
For the plugs and receptacles industrial serves a definitive solution that can guarantee the security and of having a workplace up to standard.
In all the sites in the case of single-phase and three-phase it is compulsory to use the industrial plug. The problem arises in connection with power tools, with the classic German socket with round pin Schuko. How to use a power tool wired standard from the factory with the Schuko plug?
The solutions here adopted were incorrect from the point of view of safety, because there is no evidence or the cutting off of the Schuko plug the original or with the aid of an external adapter: these solutions are dangerous from the point of view of safety, and is liable to sanctions.
Here is the solution proposed by Dinamitek: the adapter changes the grip of the power tool making it indeed a socket, industrial, with just the right degree of protection as is required by applicable legislation.
This mount – and the operation is very simple and intuitive – the Schuko socket in the compartment within the adapter, and secure it by tightening the two screws, and close the adapter. With the adapter patented you have a industrial plug which you can wire a schuko plug so hard, because after the assembly operation, get a plug industrial. The operation is just as easily reversible, loosen the two screws, and return to have your power tool, wired with Schuko socket original.
The universal adapter has very many fields of application, proves to be an effective solution on several occasions, in addition to being fundamental in the context of professional work, such as professional kitchens, especially in construction sites, mainly in the construction sites. The adapter is useful on the sites where you find paintings with industrial sockets. An external adapter should be as well, however, to tie in to the electrical outlet, but the universal adapter ensures a greater level of safety. The same is true in the areas of the mooring boats. It is the contexts of entertainment, to have a safe means zero worries and fully enjoy the holiday.
In any situation where you can choose between the Socket and the plug, industrial, make a choice towards safety and using the universal adapter.
Why use this solution?
For the safety of the workplace and of the worker: with an external adapter classic you get a degree of protection IP 20, with universal adapter degree of protection salt to IP40.
Not to change irreparably, power tools professional, losing the warranty coverage and the ability to request assistance, maintenance and repair at home mother.
To comply with current legislation which provides that the degree of protection in the construction site should be IP 40.
In order to avoid unwelcome penalties.
What is the degree of protection IP 20 and IP 40?
The IP classification indicates the degrees of protection of enclosures of electrical equipment, The first digit indicates the level of protection from solid material, while the second digit indicates the protection against penetration of liquids
IP 20: protected against solid bodies over 12 mm in diameter and no protection from liquids
IP 44 minimum protection required on construction sites: protected against solid bodies over 1 mm in diameter and
protected against water spray from all directions
Watch the video
