- New
ST-7745L-A PNEUMATIC GRINDER FOR DEPRESSED CENTER DISC Ø 115/125 MM SUMAKE
The Dalmar ST-7745L-A pneumatic angle grinder develops a power of 1.2 HP with a no-load speed of 10,900 rpm, guaranteeing high removal and cutting capacities even in the most demanding industrial processes.
Designed for use with 115 mm and 125 mm discs (M14x2.0 shaft thread) , it is equipped with lever start, integrated protective guard and side handle for maximum operational control.
The orientable front air exhaust system and the compact body with a head height of just 85 mm allow for precise and ergonomic operation in mechanical workshops and construction sites.
Technical features
- No-load speed: 10,900 rpm
- Usable disc diameter: 115 / 125 mm
- Engine power: 1.2 HP
- Shaft Thread: M14 x 2.0
- Air consumption: 540 l/min
- Recommended tube diameter: 10 mm
- Air connection: 1/4"
- Head height: 85 mm
- Overall length: 255 mm
- Weight: 1.8 kg
- Included in delivery: Protective cap, side handle (disc not included)
Complete Technical Data
| Mechanical Specifications and Performance | |
|---|---|
| Model: | ST-7745L-A |
| Type: | Pneumatic angle grinder |
| Disc diameter (mm): | 115 / 125 mm |
| No-load speed: | 10,900 rpm |
| Power: | 1.2 HP |
| Shaft thread: | M14x2.0 |
| Weight: | 1.8 kg |
| Total length: | 255 mm |
| Head height: | 85 mm |
| Air consumption: | 540 l/min |
| Recommended tube (Ø): | 10 mm |
| Air connection: | 1/4" |
Applications
The Dalmar ST-7745L-A pneumatic angle grinder is designed for heavy-duty applications in industrial, naval, heavy metal fabrication, and welding and carpentry workshops. It is suitable for continuous cutting of profiles and rods, smoothing of weld seams, and roughing of castings or metal elements.
Advantages
- Heavy Duty Construction: 1.2HP air motor ensures consistent force and resistance to jamming under heavy stress.
- Compact head size: The head height of only 85 mm allows easy access even in sharp corners and tight spaces.
- Safety and Cleanliness: The swiveling front air exhaust moves debris away from the impact zone and the operator.
- Driving ergonomics: The auxiliary side handle ensures a firm and balanced double grip when cutting and grinding.
Compatibility
- Discs and brushes: Compatible with all cutting and grinding discs, flap discs and wire brushes with a diameter of 115 mm or 125 mm and a hole/thread of M14x2.0.
- Pneumatic supply: Can be connected to compressed air systems with a 1/4" connection and a flexible hose with an internal diameter of 10 mm.
Examples of use
- Cutting and shearing of tubular steel, steel profiles, and metalwork beams.
- Heavy grinding and smoothing of weld seams on tanks, structures and metal plates.
- Removal of casting burrs, scale and rust from foundry or naval carpentry elements.
- Preparation and chamfering of edges on sheet metal edges before welding operations.