- As long as stocks last
DISPUESE5LT 02 TOWER DISPENSER GEL DINAMITEK
COLUMN DISPENSER GEL NEW CLEAN MADE IN ITALY
An indispensable tool for the protection of your employees and your customers .
The regulator's hands is the height of one meter, convenient to be able to be enjoyed by all. On the front of the column are shown clearly in the instructions for igienizzarsi properly hands.
The gel is antiseptic and sanitizer based on alcohol and hydrogen peroxide.
The column is distributed already assembled and complete with canister, 5 litres of liquid sanitizing hands.
The product corresponds to the Directive 2001/95/EC note "on General Safety Of Products", Transposed in Italy with Legislative Decree No. 172 Of 21 May 2004, the G. U. N. 165 of 16 July 2004, the Legislative Decree of 6 September 2005, No. 2060003572-D-18/03/2020
The post DISPUESE5LT 02 MADE IN ITALY for the provision of gel hand sanitizer New Clean install at the entrance of each activity to protect your employees and customers, is shock-resistant to thermal shocks and atmospheric agents.
Its structure is specially designed to be durable and long lasting while remaining lightweight. In the upper compartment of the column is housed in the canister with 5 litres of gel for sanitizing hands. The dispenser is a button, so easy to use, also with the elbow if you do not want to have direct contact with the surface. The bottom base is reinforced to offer more support to the whole structure.
INFORMATION ON THE GEL HANDS
The gel hands New Clean is a product that is antiseptic and antibacterial based on alcohols and hydrogen peroxide.
It is an antiseptic and antibacterial for prolonged action, the special training that prevents and slows the formation of microorganisimi and viruses on the hands, which we well know to be the largest source of risk for the infection (the hands should always be kept clean, and away from the face).
This gel is hands respects the skin, has a pH: 7+/-0,5, not greasy but leaves your hands soft and fragrant.
The use is simple and intuitive, just spray it on the palm of the hand a quantity of product sufficient (2/3 sprays) and rub your hands for about 1 minute. No need to rinse
The gel hands New Clean is liquid, limpid, fragrant, with ph: 7+/-0,5. It is not corrosive and is compatible with all the materials, which means that does not damage surfaces or clothes if it comes in contact.
The 5 liter tank is sold separately, to be able to restore the functioning of the column the dispenser, once you have exhausted the product.
The product, stored in dry environment and in its original packaging lasts for 24 months.
should be stored at temperatures between 7°c and 25°c and should avoid exposure of the hand sanitizer liquid in the sunlight.
DISPUESE5LT 02 TOWER DISPENSER GEL HAND
Thanks to the chemical properties of the materials of construction, this post from the simple appearance and regular is among the best solutions available on the market.
The internal structure POLIONDA WHITE 10 MM (POLYPROPYLENE HONEYCOMB).
External structure in POLIONDA TO DROP BY 3 MM.*
The post has the UV coating semi-gloss
The great advantage of this column is that it is supplied already assembled and complete with tank of 5 liters of gel, and then it is ready to use
This product is in conformity with all the relevant provisions of the following European Directives:
DIRECTIVE 2001/95/EC note: the "general product Safety" (implemented in Italy with LEGISLATIVE DECREE No. 172 OF 21 MAY 2004, the G. U. N. 165 OF 16 JULY 2004). LEGISLATIVE DECREE 6 SEPTEMBER 2005, No. 206. The code of the consumption.
STUDY OF THE MATERIALS OF CONSTRUCTION OF THE COLUMN
The POLYPROPYLENE (or POLIPROPENE, abbreviated PP) is a thermoplastic polymer which can show different strategy. The polymer is isotactic is semicrystalline and is characterized by a high tensile, low density, good thermal resistance and abrasion resistance.
The density of ISOTACTIC POLYPROPYLENE is 900 kg/m3 and the melting point is over 165 °C. The chemical properties, determined at the time of production, include the stereoregolarità, the molecular mass and the index of polidispersione.
The PRODUCT is ATACTIC, it presents as a material of the appearance, chewy and has been used as an additive.
The internal structure POLIONDA WHITE 10 MM (POLYPROPYLENE HONEYCOMB) density isotactic is 900 kg/m3 and the melting point is over 165 °C, while the external POLIONDA TO DROP BY 3 MM, resistant to shock, temperature changes and atmospheric agents, is lightweight and has been coated with UV semi-gloss.
Anonimo published the 22/12/2016 following an order made on 22/12/2016