SUPERIOR PLASMA 70 230V-400V AND ACC. 3PH PLASMA CUTTING TELWIN

SUPERIOR PLASMA 70 230V/400V + ACC.
code 816170
Compressed air plasma cutting inverter system, with contact ignition of the pilot arc.
It allows fast cutting without deformation, cutting on grids and gouging of all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass, etc.
Possibility of interfacing with automated cutting systems.
Characteristics:
- high transportability;
- high stability of the cutting current;
- easy-to-read and adjust digital panel;
- remote control;
- thermostatic, overvoltage, undervoltage, overcurrent, short circuit in torch, phase failure, air failure protections.
Complete with torch.
3 PH 230V-400V
INVERTER
CONTACT TRIGGER
CE MARKING

CABLE TW05V-A 1X016 L=05,00M/DINSE 125320
PV PLASMA TORCH 6 M 742712
TOLEDO 300 GROUND CLAMP 712231

CODE 816170
POWER FACTOR (cosphi) 0.9
THREE-PHASE MAINS VOLTAGE 230 / 400 V
MAXIMUM CUTTING THICKNESS 30 mm
MAINS FREQUENCY 50 / 60 Hz
COMPRESSED AIR FLOW RATE 200 l/min
CURRENT REGULATION RANGE 20 - 50 / 20 - 70 A
COMPRESSED AIR PRESSURE 4 - 5 bar
MAX CURRENT (EN 60974-1)50 @ 35% / 70 @ 30% A
PROTECTION DEGREE IP23
MAX NO LOAD VOLTAGE 310 / 325 V
DIMENSIONS 47 x 19 x 35.5 cm
MAXIMUM ABSORBED CURRENT 16 / 13 A
WEIGHT 15.8 kg
MAX ABSORBED POWER 5.5 / 8.5 kW
EAN CODE 800489799649 3
90% YIELD