HDV18DBL2 CORDLESS DRILL WITH PERCUSSION 18 V 5.0 AH HIKOKI

Cordless drill with percussion - Brushless - 18 V - 5.0 Ah code DV18DBL2 HIKOKI
High performance reversible hammer drill. Powered by 18V battery. Comes with two 5Ah high performance lithium batteries. This hammer drill unleashes unmatched power.
Tool for professional use, with a high visual impact and ergonomic design. The grip is always very safe in all applications, even the most demanding, thanks to the elongated side handle. In addition to the LED light to illuminate the work area, the machine is equipped with an indicator of the states of use by means of a flashing light.
Hitachi's BRUSHLESS motor offers only advantages:
suitable for massive use,
long service life of the tool,
electronic management of all functions,
absence of friction and sparks.
The switch of this drill is subjected to pilot currents only. Since they are not high, the result is greater efficiency, up to 50% more than the traditional brush motor.
The robust machine body is designed to be ergonomic and improve the usability of the tool. The screwdriver drill is super compact. The gearbox is made of duralumin.
Only high performance: the two mechanical speeds allow the tool to reach the maximum tightening torque 136Nm in direct drive screwdriving. A truly impressive value for a cordless impact drill.
The RFC Reactive Force Control function that the machine is equipped with serves to protect the operator in the event of the tip blocking during use. This is how RFC works: a sophisticated internal sensor monitors the force of the motor so that it immediately detects a possible blockage. By intervening with the RFC, the operator does not risk accidents such as twisting the arm.
This tool is equipped with the prestigious single ring keyless chuck with metal spindle lock.
The tightening torque is adjustable in 22 positions for always precise tightening with respect to the material on which you are working.
This impact drill is equipped with a quality cooling system and an electric motor brake.
Fields of application:
unscrew and tighten various types of screws and nuts
up to 10 x 90 mm in wood
standard metric screws M6. TO
drill up to 76 mm in wood,
drill 13 mm in mild steel,
drill 16 mm into concrete and brick.
Data sheet
Spindle opening 1.5 ~ 13mm
Spindle connection 1/2 "x 20 UNF
Ø hole in concrete 16 mm
Ø hole in the brick 16 mm
Ø hole in steel 13 mm
Ø hole in wood 76 mm
No-load speed (L) 0 ~ 500rpm
No-Load Speed (H) 0 ~ 2,100rpm
Vacuum percussion 0 ~ 31.500 n ° / min
Tightening torque flexible joint 62 Nm / rigid 136 Nm
Tightening torque with clutch 2 ~ 8 Nm - 22 positions
Battery model BSL1850
Typical data battery 18 V - 5 Ah - lithium slide battery
UC18YFSL battery charger
Charging time 75 min.
Length 204 mm
Width 74 mm
Height 257 mm
Weight (EPTA) 2.5 kg