HDH18DBL BATTERY HAMMER 18V 5.0AH HIKOKI

18 V 5 Ah rotary hammer code DH18DBL HIKOKI
Tool with powerful percussion device, suitable for drilling any type of hole. The electro-pneumatic hammer drill is equipped with a high-performance Brushless motor and is supplied with two high-capacity 5 Ah lithium batteries. Thanks to the Brushless motor, the service life of the rotary hammer is considerably longer. Furthermore, the absence of brushes allows a completely electronic management of the tool functions. The machine works in complete absence of friction and sparks. This means that the circuit-breaker is subjected only to pilot currents of minimum intensity, increasing the efficiency by 50% compared to other hammers of the same range.
The modern design has led to this new balanced conformation, with the vertical engine. Both the rear and side handles are soft-grip
The rotary hammer is equipped with a selector with 3 working modes:
rotation only, rotation with percussion or percussion only.
When the engine is running, the LED is activated which perfectly illuminates the work area. From the same led, thanks to the led button, it is possible to check the state of the battery charge.
The DH18DBL has nothing to envy to higher class hammers:
mechanical safety clutch
empty shot prevention device
pressure balance device
RCF Reactive Force Control which protects the user from sudden blocking, signaled by the flashing of the LED

Data sheet
SDS-plus connection
Ø hole in steel 13 mm
Ø hole in wood 27 mm
Ø hole in concrete 26 mm
Ø hole in concrete with crown tip 50 mm
No-load speed 0 ~ 1,050rpm
Percussion at full load 0 ~ 3,950 strokes / min
Single shot energy 2.2 J (EPTA)
Battery model BSL1850
Typical data battery 18 V - 5 Ah - lithium slide battery
Charging time 75 minutes
UC18YFSL battery charger
Length 351 mm
Width 80 mm
Height 220 mm
Weight 3.7 kg
High drilling capacity:
27 mm in wood,
13 mm in steel,
26 mm in concrete,
50 mm in concrete with crown tip.