HDH40MEY COMBI HAMMER 1150 W HIKOKI

Combined hammer - 7,5 kg - Brushless - UVP - ZVRP code DH40MEY HIKOKI
The hikoki combi hammer is AC BRUSHLESS, Hitachi's sophisticated and high-performance electronic technology: high rotation speed and impact energy per single stroke, a good 8.7 Joule (EPTA)! The speed control takes place electronically and therefore remains constant during each application phase. The optimum speed is set with a push-button panel with display, then the implement proceeds by itself.
The Brushless motor is designed to withstand all voltage fluctuations, drops and overloads typical of the power supply of construction sites, where generators and cables that are too long are used. The tool always works at maximum performance throughout its long life. The same ZVRP protection system intervenes to prevent accidental starting if the switch is pressed when the power returns.
The combined hammer has the SDS-Max quick coupling attachment. The change of position of the cutting angle of the chisel takes place in a simple way, by means of a special mechanism. The gear lever, thanks to the renewed design, has been moved to the upper position so it is more comfortable to maneuver.
The combination hammer has an AHB aluminum motor body and is equipped with a safety clutch.
In favor of the user, the combination hammer is equipped with a special anti-vibration UVP technology that lowers the level of vibrations to 8.0 m / sec2.
Opening of holes in reinforced concrete (max 40 mm).
Opening of anchoring holes (crown max 105 mm).
Crushing of concrete, grooving, squaring by means of optional accessories.
Data sheet
Ø hole in concrete 40 mm
Ø hole with crown tip 105 mm
Connection SDS-max
Power consumption 1,150 W
No-load speed 250 - 500 rpm
Percussion at full load 1430 - 2850 strokes / min
Single hit energy 8.7 J (EPTA)
Length 477 mm
Width 108 mm
Height 242 mm
Weight 7.5 kg
Maximum drilling vibrations 8 m / s2 (triaxial) EN 60745
Maximum vibrations when chipping 7.3 m / s2 (triaxial) EN 60745