Demolition hammer - 7,3 kg - Brushless - UVP - ZVRP code H45MEY HIKOKI
6 kg class demolition hammer for construction. It is used for demolition wall work, for driving poles to make grooves and for peeling plaster. Thanks to its demolition capacity, 1150 W and 10.1 Joule (EPTA) of energy per single shot, it is chosen by professionals looking for high performance. Much appreciated in the industry is the robust aluminum motor housing (AHB). This model has a very large switch lever to facilitate the user. Every detail of the design of the H45MEY demolition hammer is ultra-ergonomic to create a working feeling that you will never want to give up.
This model is equipped with Hitachi AC BRUSHLESS technology, the real secret of electronic technology that allows great demolition performance. The brushless motor perfectly tolerates the voltage variation. This feature makes the hikoki demolition hammer suitable for life on the construction site, where powering with a generator or with extensions that are too long can be discontinuous. Without adequate tool technology, performance drops and tool damage could occur. Furthermore, in the event of accidental disconnection of the power supply, the ZVRP device prevents accidental restarting even with the switch activated.
The demolition hammer is equipped with a quick coupling SDS-Max coupling. For the choice of the chisel position among the 12 possible ones, the machine is equipped with a special device that is easy to use.
For speed control, the hammer is equipped with a keypad and digital display. The electronic speed control allows you to keep it constant in every phase of use. The display is also used to check for setting and operating errors.
Hitachi technological development (UVP) has made it possible to obtain a very powerful machine, but which provides very low vibration levels, only 8.0 m / sec2. The rear suspension handle has been renewed to further lower the intensity of the vibrations transmitted to the user.
Data sheet
Power consumption 1,150 W
Connection SDS-max
Percussion at full load 1,430 - 2850 strokes / min
Single hit energy 10.1 J (EPTA)
Length 480 mm
Width 108 mm
Height 237 mm
Weight 7.3 kg
Maximum vibrations (EN60745) 8.0 m / s2 (triaxial)
