11510 M TIRE INFLATOR DIAMETER 80 MICHELIN
Measure, check and adjust tyre pressure with maximum precision thanks to the professional Michelin 11510 M inflation gun.
The Michelin 11510 M tire inflator gun represents the standard of excellence for workshops, tire dealers, and service centers that demand total reliability in tire service. Built from an innovative, advanced technopolymer and equipped with a large 80 mm pressure gauge , it guarantees millimetric measurements and extraordinary resistance to impacts and intensive workshop use.
- IXEF® structure: glass fibre reinforced polyarylamide to resist very high pressure, impacts and corrosion.
- Highly readable pressure gauge: 80 mm dial protected by a transparent plate and entirely covered in shock-absorbing rubber.
- Internal filtering system: microporous valve in steel, nickel and silver that blocks impurities in the compressed air.
Shipping cost: Free
for
Professional Inflating Gun Michelin 11510 M with Pressure Gauge Ø 80 mm
The Michelin 11510 M professional inflator gun is an industrial tool designed to offer superior performance. It combines advanced technological materials with a proven and robust measuring system, ensuring impeccable and consistent precision over time.
Materials Technology: Reinforced IXEF® Structure
The pistol is made entirely of IXEF® (polyarylamide) reinforced with glass fiber . This composite material gives the body of the instrument extraordinary rigidity and mechanical resistance comparable to that of metal alloys, while ensuring extraordinary lightness and perfect ergonomics of use. The structure is completely immune to chemical corrosion from oils and workshop solvents and resists drops onto concrete with flying colors.
80mm High Precision Pressure Gauge with Full Protection
Pressure readings are provided by a very large pressure gauge with an 80 mm diameter dial , equipped with an extremely stable and responsive professional indicator needle. To protect the instrument in harsh working environments, the display is protected by a high-resistance transparent plate, and the entire body of the pressure gauge is wrapped in a thick, soft rubber protective cover that effectively absorbs the energy of accidental impacts.
Internal Protection and Microporous Air Filtration
Compressed air from workshop lines often contains microparticles of condensation, oil, and rust that can compromise the internal reading mechanisms. The Michelin gun is equipped with a special microporous air filtration system made of steel, nickel, and silver . This safety valve blocks any impurities before they reach the pressure gauge, safeguarding the instrument's efficiency and millimetric precision over time.
Accuracy and Working Range
- Guaranteed precision detection: between 0.7 bar and 11 bar , ideal for covering cars, motorcycles, commercial vehicles and SUVs.
- Overpressure resistance: the instrument has an internal safety device that tolerates accidental high pressure peaks up to 13.75 bar without damaging the pressure gauge calibration.
- Professional Hose: 1.5m long high-pressure inflation hose for working from a safe distance or on large wheels.
- Standard connection: air inlet with 1/4" gas female connection.
Safety Regulations and Certifications
The Michelin 11510 M inflation gun is approved and fully compliant with the strict European and national legal metrology standards:
- Certified according to Directive 86/217/EEC
- In compliance with Decree 88/87
- Compliant with NFR 63-302 Standard
Technical Summary Sheet
- Item Code: 11510 M (Spiralflex Distribution)
- Brand: Michelin
- Body Material: IXEF® (glass fiber reinforced polyarylamide)
- Pressure gauge diameter: 80 mm (with protective rubber shell)
- Measuring Range: 0.7 - 11 Bar
- Maximum Holding Pressure: 13.75 Bar
- Tube Length: 1.5 meters
- Air Connection Thread: 1/4" Gas Female
11510 M
Measure, check and adjust tyre pressure with maximum precision thanks to the professional Michelin 11510 M inflation gun.
The Michelin 11510 M tire inflator gun represents the standard of excellence for workshops, tire dealers, and service centers that demand total reliability in tire service. Built from an innovative, advanced technopolymer and equipped with a large 80 mm pressure gauge , it guarantees millimetric measurements and extraordinary resistance to impacts and intensive workshop use.
- IXEF® structure: glass fibre reinforced polyarylamide to resist very high pressure, impacts and corrosion.
- Highly readable pressure gauge: 80 mm dial protected by a transparent plate and entirely covered in shock-absorbing rubber.
- Internal filtering system: microporous valve in steel, nickel and silver that blocks impurities in the compressed air.