KBC030 CAR AND MOTORCYCLE BATTERY CHARGER - CHARGE MAINTENANCE 12V-3A ZETEK
BATTERY CHARGER WITH CHARGE HOLDING FUNCTION 12V-3A KBC030 ZETEK
Instruction manual in Italian.
Cable with red / black alligator clips.
Cable with ring terminals (to screw to the battery).
BATTERY CHARGER - CHARGE MAINTAINER
Preserving your vehicle's battery is a priority, so choose a charger that is capable of optimizing charging. Control takes place via a microprocessor. The KBC030 charger will allow you to extend the useful life of the battery.
The use is the most elementary and instinctive for this kind of device. To further facilitate use, this tool is protected against short circuits and polarity reversal of the terminals. The clamps included are the classic alligator clips and the ring clamps, those to be screwed to the battery poles. Also for the safety of the battery, the instrument is equipped with an automatic compensation device for the ambient temperature. A practical instruction manual in Italian will facilitate the use of the instrument even for less experienced people.
The charger is equipped with a casing made of shockproof material, perfect to be used without risk not only in the workshop, but in all conditions in which you will need to recharge the battery of your vehicle. If you use it mainly in the workshop, you can decide to fix it to the wall: the charger has holes in the body made specifically to serve this purpose.
PULSE TECH TECHNOLOGY
- Mains power supply 220 ~ 240Vac / 110 ~ 120Vac / 50 / 60Hz
- 12V controllable battery types (lead acid, liquid, AGM, MF, CA, VRLA and most GEL).
- It manages capacities from 10 to 200Ah
- Charging voltage 12 - 14.8V
- Maximum charging current
- 1.5A (KBC015)
- 3A (KBC030)
- 5A (KBC050)
- 5-step charging mode
- fast charging,
- Dimension L x W x D mm 170 x 75 x 50
- Weight 700g