IDROTRON 200 CTN HIGH PRESSURE CLEANER THREE PHASE HOT WATER HIGH-TRON

High pressure cleaner three phase hot water high-IDROTRON 200 CTN

High pressure washer professional hot water 200 bar, for continuous use ideal for solving problems of dry in every working environment
IDROTRON 200 CTN is the pressure washer suitable for professional and industrial use to solve the problems of a heavy duty washing. The hot water also helps remove grease beyond that of wash, and then solves the needs of the cleaning particulates. Thanks to a thermostat you can easily adjust the temperature
The motor of the cleaner is a professional 4-pole. The amperometric detection is possible, the engine is equipped with a protection device and the contactor. Also the boiler is equipped with thermal protection.
The cleaner IDROTRON 200 CTN pump with 3 pistons in integral ceramics. The pump head is made of brass. The pressure control valve is integrated.

This model is the one with the diesel tank largest: 18 litres! The tank has a float level and filter fill. Thanks to a spy you can accept the lack of diesel and fuel without any loss of time. the burner works with a late departure.

In this model, the water basin is equipped with the device, and tank anti-scale, which means that the average life of this cleaner is far superior to that of the competitors without this. The suction of the water is direct. The machine is equipped with a suction filter cartridge. This filter is inspected. You always have the maximum control on the state of the cleaner.
The suction of the cleaning solution at low pressure and is adjustable. In case of need it is possible to draw the detergent directly from the external tank.
This cleaner works with self-priming pumps.

The IDROTRON 200 CTN has the device Total stop time limit. A light yet tells you if the machine is under voltage.

plus
water tank with the device and tank anti-scale
group ventilation boiler independent
the inspector panel, pump pressure and cleaning water filter
pump with 3 pistons in integral ceramics and brass head

TECHNICAL CHARACTERISTICS
Model – to- Code IDROTRON 200 CTN
Motor phases 3 Kw 7 Volt 400 Hz 50
pressure Bar 200
water flow L/h 900
temperature of output water ° C 110
diesel fuel tank Lt 18
rpm pump rpm 1400
detergent tank Lt 13
weight Kg 125
size 92x62xh85

ACCESSORY KIT INCLUDED
• Gun, ergonomic GH301 with swivel 24100182
• Rubber hose, high pressure, mt 10 33010776
• Lance angled head and fin. without nozzle 33010787
• Nozzle jet 25° 1/4” MEG 34000422

KIT OPTIONAL ACCESSORIES
• kit sabbiante 33010772
• kit, probe flushers mt 25 30450041
• hose kit lance with rotating nozzle 33010893