OPT058OP8253 - COLUMN DRILL 400 V MODEL B25 WITH V-BELT DRIVE
OPT058OP8253 - COLUMN DRILL 400 V MODEL B25 WITH V-BELT DRIVE Dinamitek 1

058OP8253 B25 DRILL COLUMN 400 V OPTIMUM TRANSMISSION V-BELT

Drill column 400 Volt

model B25

transmission v-belt

Technical data sheet:

motor power 400 V 50 Hz - 0.55 kW,

maximum capacity drilling steel (S235JR) : 20 mm,

maximum capacity drilling continues on the steel (S235JR): 18 mm.

Distance spindle/column: 170 mm,

the spindle taper CM 3,

stroke of quill: 80 mm,

spindle speed: 210 – 2220 rpm,

12 speed,

table dimensions: 275x275 mm,

dimensions T-slots: 14 mm,

table drill tilt/swivel ± 45 degrees / 360 degrees,

maximum distance spindle/table: 760 mm,

basic dimensions: 235x200 mm,

maximum distance chuck/base: 1210 mm,

DEGREES column: 70 mm,

size: 690x390x1570 mm,

net weight: 60 kg

Shipping cost: Gratis for
504,14 €
Tax included

504,14 € Tax excluded

Quantity
Available product, order it now.

Drill column 400 Volt model B25 OPTIMUM transmission v-belt code http://www.ltf.it/prodotti.php?b=46&c=1181&p=6511

Standard equipment:

spindle autoserrante 0-16 mm quick-clamping,

taper CM3,

nuts T.

Drill press with v-belt drive with powerful electric motor very good quality of 400 volts and reverse gear right-to-left. The engine is not only powerful, but also quiet. Suitable for work environments where you are trying to maintain an acoustic comfort, keeping the noise level within acceptable limits. The noise level low is due to the driving force in most teeth, is adjusted.
The transmission of the drive force of the motor has been optimized thanks to the pulleys and aluminium and with v-belts and toothed GATES.
The drill press OPTIMUM has a accuracy of concentricity is high, measuring ≤ 0.03 mm at the headquarters of the attack of the drill chuck.
V-belts have the cover with the safety switch.
The shaft of the drill chuck is mounted on precision ball bearings: every single component of the drill is designed to give precision and quality to the product.
The use of the drill press is really easy, thanks to simple tricks with which you made the machine. The lever of the descent of the tube, for example, is long, ergonomic and coated with a comfortable material softgrip cover-slip. The drill is also equipped with firm drilling depth.
The work table is precision, and is tiltable ± 45 degrees and rotatable 360 degrees.
The T-nuts for the fastening of the clamp screw are standard.
The starter switch of the drill is safety, classified IP 54, while theemergency stop switch is separated to be easily accessible. The drill also has the functional relay of the minimum voltage.
The the base is massive and of ample size to give good stability. It has grooves and is reinforced from the back side through the ribs.

Technical data:

motor power 400 V 50 Hz - 0.55 kW,

maximum capacity drilling steel (S235JR) : 20 mm,

maximum capacity drilling continues on the steel (S235JR): 18 mm.

Distance spindle/column: 170 mm,

the spindle taper CM 3,

stroke of quill: 80 mm,

spindle speed: 210 – 2220 rpm,

12 speed,

table dimensions: 275x275 mm,

dimensions T-slots: 14 mm,

table drill tilt/swivel ± 45 degrees / 360 degrees,

maximum distance spindle/table: 760 mm,

basic dimensions: 235x200 mm,

maximum distance chuck/base: 1210 mm,

DEGREES column: 70 mm,

size: 690x390x1570 mm,

net weight: 60 kg

The above data are not binding and at the discretion of the manufacturer can be changed

ART. OPTIONAL ACCESSORIES

305 0573 Chucks gripping clamps with attack CM3 / 1 - 16 mm

305 0636 Extractor CM1-3

305 0660 Taper CM3 - B16

305 0663 reduction Bushing CM3-CM2

335 2017 deposit Box bracket SPW 12, 58 pcs

335 2002 cooling System universal 230 V

335 2042 Tappers with clutch and reverse

335 6660 Hose, refrigerants KMS 2

335 6663 cooling System

024OP0100 Vice BSI-Q 100

024OP0140 Vice BSI-Q 140

025OP0075 Vice MSO 75

025OP0100 Vice MSO 100

025OP0125 Vice MSO 125

026OP0100 Vice BSI 100

027OP0085 Vice BMS 85

027OP0100 Vise BMS 100

027OP0120 Vice BMS 120

027OP0150 Vice BMS 150

3352042 tapping machine With Clutch Reversal From M5 to M12

Optimum
Qualità, precisione, longevità e stabilità di valore caratterizzano le macchine per la lavorazione dei metalli, garanzia tedesca


058OP8253

Accessories

You might also like