OPT050OP0310 - LATHE MODEL TU 2004 V WITH DIGITAL DISPLAY AND CONTINUOUS ADJUSTMENT OF THE RPM - POWER OUTPUT 230 V
OPT050OP0310 - LATHE MODEL TU 2004 V WITH DIGITAL DISPLAY AND CONTINUOUS ADJUSTMENT OF THE RPM - POWER OUTPUT 230 V Dinamitek 1

050OP0310 TU 2004 V-LATHE OPTIMUM WITH DIGITAL DISPLAY AND CONTINUOUS ADJUSTMENT OF THE RPM POWER 230 V

Lathe model

TU 2004 V

with digital display and stepless speed

motor power: 230 V 50 Hz - 600 W

height of centres 100 mm

distance between centres 300 mm

diameter of turning over bed: 200 mm

width of the pallet 100 mm

size: 830x425x360 mm

weight: 61 kg

Shipping cost: Gratis for
1343,16 €
Tax included

1.343,16 € Tax excluded

Quantity
Available product, order it now.

Lathe model TU 2004 V OPTIMUM with digital display and stepless regulation of the number of revolutions code 050OP0310

STANDARD EQUIPMENT
Self-centering three-jaw chuck Ø 100 mm
Tailstocks fixed CM 2 - CM 3
Wall water curtain and bath get-chips
Tool holder with 4 compartments
Gear Set exchange
Service keys

The lathe for metal processing with automatic feed longitudinal. The nose of the spindle has a precision of concentricity ≤0.009 mm. L’the shaft of the main spindle is hardened and mounted on precision bearings with tapered rollers. The nose of the spindle is hardened to DIN 6350. L’attack of the dowel is cylindrical. It is a product very efficient and excellent workmanship.

The pallet prismatic lathe is made of solid cast iron with reinforced ribs, hardened by the method of induction and precision ground. The guides of the pallet, these are also hardened and ground. Very convenient and practical is the tool four compartments can be rotated. Thanks to the control panel of the lathe, you can set the right and left rotation. A digital display that is easily readable displays the number of revolutions of the lathe.

The screw presenter is mounted on two bearings, the lathe is equipped with protection, self-centering with accuracy of concentricity of ≤0.04 mm. The steps of thread achievable are many, thanks to the set of transmission gears. The change of number of revolutions is via v-belts, then it is very quick and easy, as it requires a workshop with a high productivity. If you move the tailstock, you can also achieve the turning conical. The tailstock-quill and the flier with the division order are adjustable up to 0.02 mm.

For the safety of the operator, the lathe is equipped with a emergency stop switch and of the minimum voltage relay. On the slide the top is the protection antitrucioli, which is necessary in all processes of turning, regardless of the material being treated.

Base optional.

Technical data:

motor power: 230 V 50 Hz - 600 W,

height of centres 100 mm,

distance between centres 300 mm,

diameter of turning over bed: 200 mm,

diameter of turning over cross slide: 110 mm,

width of the pallet 100 mm,

spindle speed 150-2500 rpm,

2 speed adjustable electronically,

the cone of the spindle CM3,

step bar DEGREES 21mm,

step, self-centering three-jaw chuck 20 mm,

race sled top 55 mm,

run the cross slide 75 mm,

longitudinal feed 0.1 - 0.2 mm/rev,

thread pitch metric (14): 0,4 - 3,5 mm/r,

thread inch (12): 44 - 8 fil/1",

maximum height of the attack tool-holder, 12 mm,

cone tailstock CM2,

tailstock travel/quill: 65 mm,

size: 830x425x360 mm,

weight: 61 kg

The above data are not binding and at the discretion of the manufacturer can be changed

The IMAGE IS PURELY INDICATIVE AND MAY VARY FROM ACTUAL PRODUCT

ART. OPTIONAL ACCESSORIES

335 2002 cooling System universal 230 V

338 3975 measurement System magnetic digital DRO 5

338 3978 magnetic Tape, length 1,100 mm

338 4311 Tool holders quick-change push / self-AA

338 4312 Tool spare D-type, tool-square

338 4320 Holders of stock type H tool round

344 0295 Platform clamping disc Ø 170 mm

344 0230 Bezel mobile max Ø 40 mm

344 0231 fixed Bezel Ø max 50 mm

344 0305 Spindle have ER 25

344 0312 Flange for self-centering Ø 100 mm

344 0409 the machine Base

344 0702 Tailstock swivel CM 2

344 0732 Tailstock swivel with interchangeable tips CM2

344 1109 Set collets ER25

344 1122 Set collets ER24

344 2810, self-Centering cast iron 4-jaw Ø 100 mm (clamping concentric)

344 2872 self-Centering cast iron 4-jaw Ø 100 mm (clamping individual)

050OP1664 Set turning tools 10 mm, 5 pcs

900 0401 Mounting turret quick change push / self

900 0420 Mounting

Optimum
Qualità, precisione, longevità e stabilità di valore caratterizzano le macchine per la lavorazione dei metalli, garanzia tedesca


050OP0310

You might also like