OPT050OP5001 - LATHE MODEL TU2506 - 230 V - DIMENSIONS 125X500 MM
OPT050OP5001 - LATHE MODEL TU2506 - 230 V - DIMENSIONS 125X500 MM Dinamitek 1

050OP5001 TU2506 LATHE OPTIMUM 230 V DIMENSIONS 125X500 MM

Lathe

model TU2506

with gearbox feed

motor power 50 Hz - 750 W

height of centers: 125 mm

distance between centers: 550 mm

diameter of turning over bed: 250 mm

width of bed: 135 mm

size: 1250x585x475 mm

net weight: 125 kg

Shipping cost: Gratis for
1880,06 €
Tax included

1.880,06 € Tax excluded

Quantity
Available product, order it now.

Parallel lathe model TU2506 OPTIMUM with gearbox feed code 050OP5001

STANDARD EQUIPMENT
Self-centering three-jaw chuck Ø 125 mm
Tailstocks fixed CM 2 - CM 4
Wall water curtain and bath chipping
Turning tools HSS
Brida
Tool holder with 4 compartments
Gear Set exchange
Service keys

The lathe from the powerful motor that requires no maintenance. The the gears of progress are silent oil bath, characterized by the rounded shape.

The pallet prismatic cast iron has reinforcement ribs and has been induction hardened and precision ground, the same treatment as they received the guide. The cone is short, and the nose of the spindle is hardened. The shaft of the main spindle is hardened and mounted on precision bearings with tapered rollers. The flyers sleds have graduation end adjustable, divisible 0.04/0.01 mm. Quality materials and precise finish for the lathe OPTIMUM, the great performances are waiting for you.

The lathe has the precision of concentricity self-centering ≤0.04 mm, while that of the nose of the spindle is ≤0.009 mm.

Thanks to the control panel, it is easily pluggable to the right-left rotation.
The screw presenter of the lathe is mounted on two bearings, the tool holder has 4 compartments and all the slides are adjustable via gibs tapered. The tailstock-quill and the flier with the division the end are adjustable in 0.02 mm. The tailstock adjusts quickly and easily thanks to the clamping lever. The creation of the turning is an operation easy to perform: the tailstock moves of ± 5 mm.

Note the set transmission gears for threading.

As a safety device of the user, the lathe OPTIMUM has the protection antitrucioli mail on the slide top. There are also the emergency switch and the minimum voltage relay.

Technical data:

motor power 50 Hz - 750 W,

height of centers: 125 mm,

distance between centers: 550 mm,

diameter of turning over bed: 250 mm,

width of bed: 135 mm,

spindle speed: 125 - 2000 rpm,

number of speeds: 6, spindle cone CM 4,

step bar: diameter mm 26,

race sled top: 70 mm,

stroke of cross slide: 110 mm,

longitudinal feed: 0,07 - 0,2 mm/rev,

threads metric pitch: 0,2 - 3,5 mm/r,

thread inches: 56 - 8 fil/1",

height attack tool holders four compartments:

maximum 13 mm cone of the tailstock: CM 2,

stroke tailstock - quill: 65 mm,

size: 1250x585x475 mm,

net weight: 125 kg

The above data are not binding and at the discretion of the manufacturer can be changed

The IMAGE is PURELY INDICATIVE AND MAY VARY FROM ACTUAL PRODUCT.

ART. OPTIONAL ACCESSORIES

050OP1108 Set turning tools 10 mm, 11 pcs

050OP1666 Set turning tools 12 mm, 5 pcs

335 2002 cooling System universal 230 V

338 1012 anti-vibration Mounts

338 3975 measurement System magnetic digital DRO 5

338 3978 magnetic Tape, length 1,100 mm

338 4301 Tool holders quick-change push / self 1-A

338 4302 Holders of stock type D, tool square

338 4321 Tool holder spare type H tool round

344 0409 Base

344 0702 Tailstock swivel CM2

344 0732 Tailstock swivel with interchangeable tips CM2

344 1109 Set collets ER 25, 1 - 16 mm, 15 pcs

344 1122 Set collets ER32

344 1305 Spindle have ER25

344 1306 Spindle support for pliers ER 32

344 1310 Bezel mobile

344 1312 Flange for self-centering three-jaw chuck Ø 125 mm

344 1315 fixed Bezel

344 1352 Platform clamping disk Ø 240 mm

344 2812 self-Centering cast iron 4-jaw Ø 125 mm (tightening concentric)

344 2874, self-Centering cast iron 4-jaw Ø 125 mm (clamping individual)

900 0401 Mounting turret quick change push / self

900 0420 Mounting

Optimum
Qualità, precisione, longevità e stabilità di valore caratterizzano le macchine per la lavorazione dei metalli, garanzia tedesca


050OP5001

Accessories

You might also like