Drill bench 400 Volt model B20 OPTIMUM max drilling degrees 20 mm code 058OP8203
Supplied accessories:
spindle autoserrante 0-16 mm quick-clamping,
taper CM 2,
nuts T.
Drill from the bench with powerful aluminium motor 400 Volt. This model is equipped with inverter gear right-to-left. The high accuracy of the concentricity measuring ≤ 0.03 mm at the headquarters of the attack of the drill chuck.
The engine is very powerful but also very quiet due to the driving force in most teeth, is adjusted.
The transmission of the force of the motor is optimized aluminum pulleys and v-belts to gears GATES high quality serve this purpose.
The straps have the very useful cover with safety switch.
The drill-the-counter OPTIMUM it is equipped with the latch on the drilling depth.
The shaft of the drill chuck is mounted on precision ball bearings.
The T-nuts for the fastening of the clamp screw are standard.
To facilitate the use of drill-the-counter, the lever down the headstock is long, ergonomic, grip, softgrip cover.
The work table is precision, and is tiltable ± 45 degrees and rotatable 360 degrees.
The drill-the-counter supported on the base solid of large size characterized by grooves and reinforcing ribs placed on the back. The key switch meets the safety standards and is rated IP 54. The emergency stop switch, however, is separate, to be more functional. The drill is equipped with minimum voltage relay.
Technical data:
engine power: 50 Hz – 0.55 kW;
maximum capacity drilling steel (S235JR): diameter of 20 mm;
maximum capacity drilling continues on the steel (S235JR) diameter 18 mm;
distance spindle/column 170 mm;
spindle taper: CM 2;
stroke of quill: 80 mm;
spindle speed: 210 – 2220 rpm;
speed number: 12;
table dimensions: 275x275 mm;
dimensions T-slots: 14 mm;
table drill tilt/swivel: ± 45 degrees / 360 degrees;
maximum distance spindle/table: 465 mm;
basic dimensions: 205x200 mm;
maximum distance chuck/base: 645 mm;
diameter of column: 70 mm;
size: 600x350x990 mm;
net weight: 53 kg
The above data are not binding and at the discretion of the manufacturer can be changed
ART. OPTIONAL ACCESSORIES
305 0571 Chucks gripping clamps with attack CM 2 / 1 - 16 mm
305 0572 Chucks gripping clamps with attack CM 2 / 1 - 13 mm
305 0636 Extractor CM1-3
305 0659 Taper CM 2 - B16
335 2017 deposit Box bracket SPW 12, 58 pcs
335 2002 cooling System universal 230 V
335 2042 Tappers with clutch and reverse
335 6660 Hose, refrigerants KMS 2
335 6663 cooling System
024OP0100 Vice BSI-Q 100
024OP0140 Vice BSI-Q 140
025OP0075 Vice MSO 75
025OP0100 Vice MSO 100
025OP0125 Vice MSO 125
027OP0085 Vice BMS 85
027OP0100 Vise BMS 100
027OP0120 Vice BMS 120
027OP0150 Vice BMS 150
