N216 XL BAND SAWING MACHINE, CUTTING-OFF THE TAPE BY INDUSTRIAL IRON FEMI

BAND SAWING MACHINE N216 XLFEMI on a base, with powerful three-phase motor at two speeds. Equipped with mechanical cylinder for arm balancing. Between the amenities, the grip cast iron quick release complete system fast slide and graduated scale, front-opening up to 200 mm
MAXIMUM CUT 200 mm; SECTION MAX 175 mm

Cutting capacity
0 degrees of SCAT. RECTANGULAR 200x75 190x135 mm SCAT. ROUND 175 mm SCAT. SQUARE 175x175 mm
45 degrees of SCAT. RECTANGULAR 150x110 mm SCAT. ROUND 110 mm SCAT. SQUARE 110x110 mm
60 degrees of SCAT. RECTANGULAR 100x70 mm SCAT. ROUND 75 mm SCAT. SQUARE 75x75 mm

TECHNICAL CHARACTERISTICS
Vise cast iron quick release complete system fast scroll and scale the front
Panel with low tension controls (24 V) with minimum voltage coil and overload protection of the motor
Tensioning the blade indicator light and a micro-switch safety control integrity blade
The system of the balance arm and secure with compression spring fall

STANDARD EQUIPMENT
Rod bar stopper is adjustable for the execution of serial cuts (L= 500mm).
Lubrication cooling system integrated and protected.
Base

Data sheet
Motor power Watts 600/800
Three-phase motor 400 Volt-Hz 50
BLADE 2140x19x0,9
TEETH BLADE 6/10* standard blade bi-metal cobalt
RPM 2-Speed 30/60
POWER OF PUMP MOTOR OF REFRIGERATED 60 WATT
Dimensions (depth x width x height) 780mm x 1240mm x 1080mm
Weight 150 kg