Angle grinder bosch GWS 13-125 CIE Professional
bosch hose with excellent performance and with an eye to operator protection and safety. A truly HEAVY DUTY machine
The bosch grinding wheel has a power of 1300 Watts, when empty it turns 2,800 / 11,500 rpm. for a power output of 700 Watts. A really good professional machine. With the CONSTANT ELECTRONIC system, work will advance quickly.
The machine has DIRECT COOLING motor cooling and OVERLOAD PROTECTION, automatic shutdown that protects it from excessive overload, protection against dust, long-lasting carbon brushes
With the SPEED SELECTION you improve the yield, preselecting the working speed according to the material to be treated. The machine allows you to select 6 different stages. There is no application that cannot be machined with the bosch wheel. With the CONSTANT SPEED the electronic system for regulating the number of revolutions, even under load you can decide at what speed to proceed. The optimized work will change the performance of the whole working day.
The spindle thread is M14, the spindle itself can be locked for quick tool change.
The bosch grinder mounts 125 mm diameter rubber wheels and pads, and 75 mm diameter cup brushes.
The grinder weighs 2.3 kg and is 297x103 mm large, it is a really handy power tool. It has an ergonomic casing, a handle that can be used both on the right and on the left and the gear head can be rotated in 90 ° steps to be used comfortably in all applications
Let's talk now about the operator protection devices:
PROTECTION GUARD: anti-rotation protection cap that works even in the event of a disc break
VIBRATION CONTROL: reduced vibrations by adding a rubber support or foam padding to the handles
RESTART PROTECTION: prevents the tool from restarting without operator control, useful when there is a power outage and restoration
KICKBACK CONTROL: turns off automatically if the accessory is locked
SOFT START: the load and the torque of the motor are temporarily reduced during the starting phase to have a smooth start of work without jolts
In favor of the user, below are the data on the vibrations emitted, obtained from the vector sum of three directions. These values were measured in accordance with the EN 60745 standard
Surface smoothing (roughing)
Fluctuations emission value ah 6.0 m / s²
Uncertainty of measurement K 1.5 m / s²
Sanding with an abrasive sheet
Fluctuations emission value ah 2.0 m / s²
Uncertainty of measurement K 1.5 m / s²
