GSR 10,8-2-LI Professional cordless drill / screwdriver
Powerful and compact bosch drill, suitable for overhead work and in confined spaces: it takes up only 169 mm and has a sturdy 1.0 - 10 mm Auto-Lock chuck. And for the most inaccessible places, you have an integrated bright light LED that illuminates the work area. A HEAVY DUTY tool, like all those offered in the bosch Professional Tools range.
With clockwise and counterclockwise rotation it also works as a screwdriver
10.8 Volt cordless power tool with 3 LED charge level indicator. With the bosch Electronic Cell Protection (ECP) system, the battery is protected against overload, overheating and deep discharge. The LI-ION battery does not suffer from memory effect, you can recharge it how and when you want.
Powerful drill with 15 Nm tightening torque. It is a professional tool the 2-speed gears for a torque of 15 Nm (screwing in elastic material) in drilling (up to 19 mm) and screwdriving (up to 7 mm) work . The engine brake allows to be precise even in the execution of works in series. With the 2-gear system the torque is optimized for screwing and the speed is high for drilling thanks to the 2-speed planetary gears: this means excellent performance in both applications. With Speed Selection, you can preselect the speed and adapt it to the best possible application and material. This improves the work results.
Technologically advanced, the GSR 10,8-2-LI drill has the Electronic motor protection device that turns it off in the event of overload, overheating or jamming: your tool is destined for a long life. The tool is really comfortable to use, thanks to the soft grip coating.
Technical data
Tightening torque, max. (hard / soft materials) 30/15 Nm
Idle speed (1st speed / 2nd speed) 0/400/0 / 1,300 rpm.
Spindle clamping range, max. 10 mm
Spindle clamping range, min./max. 1/10 mm
Battery voltage 10.8 V
Battery capacity 2.0 Ah
Torque positions 20 + 1
Length 169 mm
Hole diameter
wood hole ø, max. 19 mm
hole ø steel, max. 10 mm
Screw diameter
ø screws, max. 7 mm
Vibration information measured in accordance with EN 60745. The overall vibration values are derived from the vector sum of three directions
Drilling in the metal
Fluctuations emission value ah 2.5 m / s²
Uncertainty of measurement K 1.5 m / s²
Screw
Fluctuations emission value ah 2.5 m / s²
Uncertainty of measurement K 1.5 m / s²
