DinamiSearch
WE SUGGEST YOU TO USE THE FAST SEARCH TO SEARCH FOR YOUR PRODUCT
Write the name/code next to the lens or use the letters of the alphabet to see all the products of the same type
XGGS 28 C STRAIGHT GRINDER BOSCH
Grinders axial
model GGS 28 C Professional
Power 600 watts
30,000 revs/min. vacuum
Soft start
Constant Electronic
DIRECT COOLING
KickBack Stop
HEAVY DUTY
Grinders axial GGS 28 C Professional
Supplied with the grinder straight bosch
2 keys fixed 19
Clamping units (clamping nut, and collet (6 mm)
Tool, universal applications, 600 watts to 30,000 revs/min. (vacuum). The compact shape and ergonomic design makes it easy and comfortable to use.
The maximum power is reached after a soft start the Soft start, this means that you always have maximum control over the process. The accuracy of the work is guaranteed by the new system of direct fixing of the wheels to the stem. With the system Constant Electronic, even under high load you can work at a number of revolutions constant, to optimize the yield of processing. The tool is not afraid of the dust, and then is designed to last longer, thanks to the ball bearing with double seal: this solution reduces the vibration and improves balance. You will not have to worry about the maintenance: the durability of the brushes has been optimized. The brush shut-off provides a high level of protection of the motor. The device DIRECT COOLING cools directly the motors, the grinder is not afraid of the overload, also thanks to the Overload protection that shuts down the tool if it occurs. It is a tool HEAVY DUTY
The tool can also be stationary, thanks to the collar of the mounting attack by 43 mm. For maximum protection of the user, the grinder axial is equipped with the device-KickBack Stop that is to shut off the tool if you lock the wheel.
Number of idle speed of 30,000 rpm.
Tool holder Collets up to 8 mm ø
Power 600 W
Power output-350 W
ø the collar shaft 43 mm
Weight 1.4 kg
ø collets for max. 8 mm
ø smoothing body max. 50 mm
Surface key lock nut 19 mm2
Surface key spindle sanding 19 mm2
Switch Bi-Directional
Information on vibrations. The overall values of vibrations are derived from the vector sum of three directions, according to the standard EN 60745
Surface grinding up to ø 50
The issue value of the oscillations ah 8.0 m/s2
Measurement uncertainty K 1.5 m/s2
Surface grinding up to ø 25
The issue value of the oscillations ah 3.0 m/s2
Measurement uncertainty K 1.5 m/s2

GGS 28 C
Anonimo published the 17/01/2017 following an order made on 17/01/2017
tutto perfetto...ottimo ebayer...consigliatissimo
Anonimo published the 27/07/2016 following an order made on 27/07/2016
ok