ANGLE GRINDER GWS 13-125 CI BOSCH
ANGLE GRINDER GWS 13-125 CI BOSCH Dinamitek 1

GWS 13-125 CI ANGLE GRINDER BOSCH

Angle grinder

model GWS 13-125 US Professional

power 1300 Watt, grinding wheels and cup wheels in rubber of 125 mm, and the brushes 75 mm

ergonomic and technologically advanced:

CONSTANT ELECTRONIC

DIRECT COOLING

OVERLOAD PROTECTION

CONSTANT SPEED

KICKBACK STOP

PROTECTION GUARD

SOFT START

VIBRATION CONTROL

dimensions and weight 297 mm high 103 mm, 2.3 Kg

Shipping cost: Gratis for
119 €
Tax included

119,00 € Tax excluded

Quantity
Available product, order it now.

Angle grinder boschThe GWS 13-125 US Professional

Cutting the head of the professional suitable for those who need to work at a high productivity, ensuring a perfect protection of the operator. A machine really HEAVY DUTY

The flexible bosch it features powerful motor, CONSTANT ELECTRONIC, 1300 Watts, vacuum get to perform 11500 rpm, delivering a power of 700 Watts. An excellent solution for heavy machining. The tool is of long duration, the cooling of the engine DIRECT the COOLING, the overload protection the OVERLOAD PROTECTION and the long life of the carbon brush make a tool from a long life. Also the conduction of air is optimized to improve the protection of the machine against the dust. The prerogative of this "galvanic" is not only his strength, but also high efficiency in the services that provide: with the CONSTANT SPEED, the electronic controller of the number of rounds you can work at a constant speed, and this allows to improve the results obtained. This device can also be adjusted under load.

The angle grinder is a long, 297 mm high 103 mm and weighs 2.3 Kg. Mounts grinding wheels and cup wheels in rubber of 125 mm diameter and brushes in cup: 75 mm. The thread is M14 and it has a large button block that allows the exchange of the tool simple and quick.

The flexible bosch has the ergonomically designed housing, this tool is really handy. The handle can be used for both right and left to better adapt to the working conditions. The head gear is rotatable in steps of 90°. You can really work anywhere with this angle grinder professional. Thanks to the extra grip VIBRATION CONTROL reduces vibration up to 40%, freeing the operator from excessive effort, as required by the standard EN 60745.

The grinder is equipped with different security systems for the protection of the operator:

the KICKBACK STOP is that the tool stops as soon as released;

the protection against the accidental reboot in case of interruption of the supply of the power tool stops and starts again up to the operator's command, even if power is restored,

the PROTECTION GUARD of the guard anti-rotation is also effective in case of breakage of the disk,

the in-rush current limiter to start SOFT-START allows a soft start, to avoid any kind of impact to the operator

the VIBRATION CONTROL that allows a comfortable work thanks to the reduced vibration. It is obtained by adding a rubber support or padding of the foam to the handle

Following the directions on the vibrations detected according to the standard EN 60745. The overall values of vibrations are derived from the vector sum in the three directions

Sanding of the surface (rough)

The issue value of the oscillations ah 6.0 m/s2

Measurement uncertainty K 1.5 m/s2

Sanding with a sheet of abrasive

The issue value of the oscillations ah 2.0 m/s2

Measurement uncertainty K 1.5 m/s2

Bosch
I migliori elettroutensili professionali per l'industria e l'artigianato, molto apprezzati in edilizia ma non solo


GWS 13-125 CI

You might also like