GPO 14 CE POLISHING MACHINE BOSCH

Polishing machine GPO 14 CE Professional

Supplied with the polisher bosch
- Handle D to adapt to all working positions
Extra grip

Polishing machine for bodywork extremely easy to handle thanks to the ergonomic handle covered with comfortable softgrip cover, you will get polishing perfect, but without fatigue, even on large surfaces. It weighs only 2.5 Kg and has compact shape.

Tool powerful motor of 1400 Watts, soft start Soft start with the safety switch Tri-Control, to have maximum control of the processing in each stage of production. The number of spins you preset with the Speed Selection to 6 stages, then you can enter the Constant Speed so as to optimize the machining to the material that one needs to deal with

The casing is plastic-coated, the insulation of the gearbox is improved, for a longer tool life HEAVY DUTY. Another device made to improve tool-life, is the placement of air intakes Direct Cooling developed for the optimal cooling of the engine, which is protected from the brush switch-off carbon. And if it is, however, overload extreme, and involved the safety device Overload protection that automatically shuts down the tool.

For the protection of the operator, bosch developed the Restart Protection that takes care of not to restart the tool if it crashes for failure to feed or jam up a specific command, and intentional activities. The recovery of the power is not enough to start the polishing machine, so you have time to grasp properly the tool and place it in the correct way before continuing with the processing accidentally interrupted.

Technical data of polishing machine

Power Of 1,400 W

Idle rpm 750 / 3.000 rpm/min.

Power output 800 W

The thread of the spindle M 14

Pad, rubber, 180 mm diameter

Brush cup, ø 100 mm

Cup wheel, ø 180 mm

Sponge pad, ø 160 mm

Brush, flat, ø 175 mm

Weight 2.5 kg

Information on vibrations, according to EN 60745

Polishing

The issue value of the oscillations ah 6.0 m/s2

Measurement uncertainty K 1.5 m/s2