0.601.221.100 GGS 28 LCE LONG AXIAL GRINDER BOSCH WITH SPEED VARIATOR
GRINDER AXIAL LONG WITH SPEED VARIATOR GGS 28 LCE BOSCH Dinamitek 1

0.601.221.100 GGS 28 LCE LONG STRAIGHT GRINDER WITH BOSCH SPEED VARIATOR

Axial grinder

Model GGS 28 LCE Professional

power 650 watts
idle rpm 10,000 / 30,000 rpm.

long, slender sanding spindle

Soft start
Constant Electronic
Direct Cooling
Overload Protection
Kickback Control

HEAVY DUTY

Shipping cost: Gratis for
306,71 €
Tax included

251,40 € Tax excluded

Request availability
Saremo chiusi per Ferie dal 06 al 21 agosto 2022.
Le vendite sono al momento sospese.
Sarà possibile acquistare di nuovo a partire dal 16 agosto, ma l'elaborazione degli ordini e le spedizioni riprenderanno a partire dal 22 agosto al nostro rientro.
Buone Vacanze!
Lo staff Dinamitek

Axial grinder GGS 28 LCE Professional

Equipment of the bosch straight grinder

13 mm fixed wrench

19 mm fixed wrench

Clamping unit (clamping nut and 6 mm collet)

Very handy tool, with surprising performance during heavy use, 650 watts of power and idle rpm 10,000 / 30,000 rpm. With the soft start Soft start the approach to work is very comfortable and then switches to maximum power for a rapid progress of the process.

With this grinder you can work even in the most inaccessible places, thanks to the long and slender sanding spindle. The machine body is compact and the tool has an ergonomic shape for maximum ease of use. The new direct fixing system of the grinding wheels to the shaft allows you to perform very precise jobs. You can proceed on any material, thanks to the preselection of the number of revolutions in six stages with the Speed selection, according to the different materials. With the Constant Electronic system, the speed remains constant even under high load. It is a sturdy tool, the disengagement brush is used to protect the motor. With Direct Cooling, direct cooling of the engine contributes to the protection of the machine. The maintenance required by the tool is minimal, the life of the brushes is optimized. A truly HEAVY DUTY tool, thanks also to the Overload protection device which intervenes in case of extreme overload, turning off the tool; the Kickback Control intervenes in the same way but in the event of a block of the wheel, this protects the user avoiding unpleasant accidents.

Technical data

Idle speed 10,000 / 30,000 rpm.

Tool holder Collets up to 8 mm ø

Power 650 W

Power output 380 W

ø shaft collar 43 mm

Weight 1.6 kg

Length 375 mm

Height 75 mm

ø collets max. 8 mm

ø sanding body max. 50 mm

Clamping nut key area 19 mm²

Key surface of the sanding spindle 13 mm²

Bidirectional switch

Vibration information standard EN 60745

Sanding of surfaces up to ø 50

Fluctuations emission value ah 14.0 m / s²

Uncertainty of measurement K 1.5 m / s²

Sanding of surfaces up to ø 25

Fluctuations emission value ah 6.0 m / s²

Uncertainty of measurement K 1.5 m / s²

Bosch
I migliori elettroutensili professionali per l'industria e l'artigianato, molto apprezzati in edilizia ma non solo


0 601 221 100

You might also like