Grinder axialGGS 28 LC Professional
Supplied with the grinder straight bosch
Spanner 13 mm
Spanner 19 mm
Clamping units (clamping nut, and collet (6 mm)
Tool for heavy-duty applications, the sanding as you have never faced before. Maximum maneuverability, power 650 Watts, idle speed of 30,000 rpm. With the soft start Soft Start you will be able to better manage the sanding, then switch to maximum power so the job will go quickly. Even the places difficult to access can be machined quickly, thanks to the spindle sanding long and slender. The camera body is compact and with an ergonomic shape, the use of the tool is versatile. The work performed will always be very precise, thanks to the new system of direct fixing of the wheels to the stem. With the Constant Speed, even under load, you can decide the number of laps, optimizing the performance of the work. This is a tool professional bosch HEAVY DUTY, long life is guaranteed by the Direct Cooling, which deals with the direct cooling of the engine. The brush is a carbon brush switch-off guarantees a high protection of the engine and for this the tool requires very little maintenance. The system Overload Protection is able to evaluate if the machine is facing an extreme overloading and to intervene by turning it off, the grinder axial bosch it is indestructible. To protect the machine and operator the device Kickback Control which intervenes in the event of locking of the accessory, in this case, the automatic shutdown of the tool prevents the occurrence of damage or accidents.
Technical data
Number of idle speed of 30,000 rpm.
Tool holder Collets up to 8 mm ø
Power 650 W
Output power 380 W
ø the collar shaft 43 mm
ø collets for max. 8 mm
ø smoothing body max. 50 mm
Surface key lock nut 19 mm2
Surface key spindle sanding 13 mm2
Switch Bi-Directional
Size and weight
Weight 1.6 kg
Length 375 mm
Height 75 mm
Information about vibration in accordance with EN 60745. The overall values are the vector sum of the values of the three directions
Surface grinding up to ø 50: Value of the emission fluctuations ah 14.0 m/s2
Surface grinding up to ø 25: Value of the emission fluctuations ah 6.0 m/s2
