75576 64860 RIGID RED PAD FOR FIBER DISCS DIAM 115 CUBITRON II 3M
RED RIGID BACKING PAD FOR FIBERED DISCS
For use with 3M CUBITRON II fiber discs
It keeps the abrasive temperature low, enhancing its performance
Fiber disc for sanding with special patented mineral CUBITRON II
To take full advantage of the advantages of CUBITRON II technology, use the red rigid backing pad in combination with the 982 C (for iron) and 987 C (for stainless steel) fiber discs available in all diameters and in all grits. The combined use of the pad with the CUBITRON II fiber disc increases the cutting capacity and the life of the discs, you will get the maximum performance from your angle grinder. The Red HD type sanding pad enhances the technical characteristics of 3M Cubitron II discs, do not be satisfied with using any sanding pad. Only with the 3M sanding pad can you keep the temperature low during processing and thus enhance the CUBITRON II abrasive specific for abrasion at low temperatures. With a generic pad the service temperature is raised and the advantages of the exclusive CUBITRON II mineral are lost.
For the CUBITRON II red rigid pad diameter 115 it is recommended to use a power tool that does not exceed 13200 rpm (maximum limit), usable with M14 threaded connection; 5/8 ".
It is recommended to use an angle grinder, fiber disc and backing pad with the aid of appropriate PPE
75576 (PN 64860)