6055 PAIR OF FILTERS FOR ORGANIC GASES AND VAPOURS, CLASS A2 3M
PAIR of FILTERS FOR ORGANIC GASES AND VAPOURS, CLASS A2
To use in combination with the respiratory facial 3m with bayonet coupling, namely, respirators half mask and full face 3m 6000 series and 7000.
Filter type 2
To use in combination with the respiratory facial 3m with plug-in system or bayonet that allows a close, accurate, and more secure, on all the respirators in half mask and full face 3m series 6000 and 7000. Only the cartridge that is used in the correct way ensures protection to the user (within the limits of the safety instructions indicated in the packaging of the filter)
Types of contaminant Vapors and gases: organic boiling point greater than 65 degrees celsius, can be used in the presence of substances such as, for example, solvents for paint spray areas (MEK, Toluene...)
The lightness of the filter combines an excellent balance of weight and an excellent visual field is ensured by the special trapezoidal shape of the cartridge
Certification These filters are in conformity with the Essential Safety Requirements laid down in articles 10 and 11B of European Directive 89/686, and therefore, they bear the CE marking.
Classification of the filter
Filter type 2
Devices used - the maximum Concentration of use for Gases, vapors, and organic and inorganic Acids and
Full Facial - 200 x TLV or 5000 ppm considering as limit the lower value
Half mask - 10 x TLV or 5000 ppm considering as limit the lower value
The A2 filter has been tested according to the standards: EN 141 (filter performance) EN 141 (respiratory resistance)
The qualitative constancy is certified by the British Standards Institute, Milton Keynes, England (0086).
The effective life of a filter depends on the concentration of the contaminant, the type of work, from the time of exposure
Anonimo published the 17/10/2017 following an order made on 17/10/2017
venditore puntualissimo e consigliato..