6055 4975 PAIR OF FILTERS FOR ORGANIC GASES AND VAPORS CLASS A2 3M

PAIR OF FILTERS FOR GAS AND ORGANIC VAPORS CLASS A2 3m 6055 2 pieces per pack

To be used in conjunction with 3m facial respirators with bayonet coupling system that allows precise and safer closure, on all 3m 6000 and 7000 series half-mask and full-face respirators. Only the cartridge used in the correct way ensures protection for the user (within the limits of the safety instructions indicated in the filter packaging)

Types of contaminants Vapors and gases: organic with a boiling point greater than 65 degrees centigrade, it can be used in the presence of substances such as solvents for common spray paints (MEK, Toluene ...)

The lightness of the filter is combined with an excellent weight balance and an excellent field of vision guaranteed by the special trapezoidal shape of the cartridge

Certification These filters comply with the Essential Safety Requirements established by articles 10 and 11B of the European Directive 89/686 and therefore bear the CE marking.

Filter classification

Filter type A 2

Brown color

Devices used - Maximum concentration of use for gases, organic and inorganic vapors and acids

Full Face - 200 x TLV or 5000 ppm considering the lower value as the limit

Half mask - 10 x TLV or 5000 ppm considering the lower value as the limit

The A2 filter has been tested according to the following standards: EN 141 (filter performance) EN 141 (breathing resistance)
Quality consistency is certified by the British Standard Institute, Milton Keynes, England (0086).

The actual duration of a filter depends on the concentration of the contaminant, the type of work, the exposure time